로저스-PCB-제조업체
An Introduction to Rogers Material PCB by PCBGOGO: 로저스-PCB-제조업체, 전자기술의 발달로, 점점 더 많은 재료를 요구하는 전자 제품이 있습니다, 로저스 소재와 같은, 고주파 회로에 사용되는 것, 국방에 사용되는 전기적 성능을 향상시키는 것, aerospace and mobile network applications.
What is Rogers PCB? Rogers is a company that manufactures the laminate materials that are used to make circuit boards. Most circuit boards are made of a material known as FR4 (Flame Retardant level 4), which is a glass fiber / epoxy composite, with copper foil laminated on one or both sides.
Rogers will sell you FR-4 laminates (FR-4 core with copper laminate), they are better known for cores with better high frequency properties, PTFE와 같은 (테프론). They’re more expensive than fiber glass, but are less lossy at high frequencies. This makes them be good for RF circuit boards.
Benefits of Rogers PCB material:
FR-4 material provides the fundamental standard for PCB substrates, keeping a widely effective balance between cost, 내구성, 성능, manufacturability, as well as electrical properties.
하지만, as performance and electrical properties plays an important role in your designs, Rogers materials have the advantages as follows:
Low electrical signal loss
Effective-cost PCB fabrication
Lower dielectric loss
Better thermal management
Wide range of Dk (유전 상수) values (2.55-10.2)
Low outgassing for space applications
Improve impedance control
Types of Rogers materials
In Alcanta PCB company, we can provide the boards with Rogers material that can withstand conditions, which has a high-frequency and high-speed performance widely categorized under PTFE-based materials and Thermoset materials. And there are several PCB materials as follows:
라미네이트
Woven Glass Reinforced Modified Epoxy Laminates
Woven Glass Reinforced PTFE Antenna Grade Laminates
Cross-Plied Woven Glass Reinforced PTFE
Woven Glass Reinforced Modified Epoxy IMS
Hydrocarbon / 세라믹 / Woven Glass UL 94 다섯-0 라미네이트
PTFE Ceramic
Hydrocarbon / 세라믹 / Woven Glass
Filled PTFE Composite
PTFE Random Glass Fiber
Bonding Materials
Thermoset Thermally & Electrically Conductive Adhesive (TECA) Film
Ceramic PTFE Bondply
Hydrocarbon / 세라믹 / Woven Glass / 프리프레그
Metal Claddings
Several models of metal claddings are offered in the following foil type:
Rolled
Electrodeposited
Electrodeposited Reverse Treated
Resistive Foil
Rogers PCB의 응용
로저스 PCBs are mainly in defense, 군대, wireless, telecommunication, 자동차 산업. A few application examples of PCBs manufactured from Rogers materials are:
Cellular Base Station Antennas
전력 증폭기
Automotive Radar and Sensors
RF Identification (RFID) 태그
Direct Broadcast Satellites
PCB Fabrication with Rogers material in Alcanta PCB company
With over 15 years as an industry leader, ALCANTA PCB is one of the most experienced PCB and PCB assembly manufacturer in China. highly specialized not only in quick-turn PCB prototype and PCB assembly, but also medium and small volume PCB fabrication. And we will try our best to fabricate your PCBs with Rogers material with the highest quality to meet your demands and committed to adhering to the strictest standards in PCB 제작 그리고 조립.
질문이 있으시면, 저희에게 연락 주시기 바랍니다 info@alcantapcb.com , 기꺼이 도와드리겠습니다.