rt/duroid®-5880-pcb
RT/duroid® 5880 печатная плата, RT5880 PCB board. Alcanta factory produce RT 5880 material Boards from 2 слой в 20 слои. HDI RT5870 materials, RT5880 materials. RT 6002 материалы, Cavtiy PCBs. high quality HDI PCBs, and fast shipping time.
RT/дуроид 5880 laminates has a low dielectric constant (Дк) and low dielectric loss, making them well suited for high frequency/broadband applications. Helping to maintain the Dk uniformity are the randomly oriented microfibers reinforcing the PTFE composites.
Функции
Dk or 2.20 +/- .02
Коэффициент рассеивания .0009 на частоте 10 ГГц
Low moisture absorption
Isotropic
Преимущества
Uniform electrical properties over wide frequency range
Easily cut, shared and machined to shape
Resistant to solvents and reagents used in etching or plating edges and holes
Ideal for high moisture environments
Well-established material
Lowest electrical loss for reinforced PTFE material
RT/duroid® 5870 и 5880 glass microfi ber reinforced PTFE composites are designed for exacting stripline and mi crostrip circuit applications.The randomly oriented microfi bers result in exceptional dielectric constant uniformity.
The dielectric constant of RT/duroid 5870 и 5880 laminates is uniform from panel to panel and is constant over a wide frequency range. Its low dissipation factor extends the usefulness of RT/duroid 5870 и 5880 laminates to Ku-band and above. RT/дуроид 5870 и 5880 laminates are easily cut, sheared and machined to shape. They are resistant to all solvents and reagents, hot or cold, normally used in etching printed circuits or in plating edges and holes. Normally supplied as a laminate with electrodeposited copper of ½ to 2 ounces/ ft.2 (8 to 70mm) or reverse treated EDC on both sides, RT/дуроид 5870 и 5880 composites can also be clad with rolled copper foil for more critical electrical applications. Cladding with aluminum, copper or brass plate may also be specifi ed. When ordering RT/duroid 5870 и 5880 laminates, it is important to specify dielectric thickness, tolerance, rolled, electrodeposited or reverse treated copper foil, and weight of copper foil required.
For the PCB design questions. or RT/duroid® 5880 PCB materials questions. Если у вас есть вопросы, пожалуйста, не стесняйтесь обращаться к нам с info@alcantapcb.com , we will be happy to help you.