rt-duroid-6035-pcb
RT-Duroid 6035 PCB, RT 6035 Fabrication de PCB, RT/duroid 6035HTC laminates are an exceptional choice for high power applications. The laminates have a thermal conductivity of almost 2.4 times the standard RT/duroid 6000 products, and copper foil (ED and reverse treat) with excellent long term thermal stability. En plus, Rogers advanced filler system enables excellent drill-ability, reducing drilling costs as compared to standard high thermally conductive laminates that use alumina fillers.
Features
Dielectric constant of 3.50 +/- .05
Dissipation factor of .0013 at 10GHz
Thermal conductivity of 1.44 W/m/K at 80°C
Thermally stable low profile and reverse treat copper foil
Benefits
High thermal conductivity
Improved dielectric heat dissipation, enabling lower operating temperatures for high power applications
Excellent high frequency performance
Lower insertion loss and excellent thermal stability of traces
RT/duroid® 6035HTC high frequency circuit materials are ceramic filled PTFE composites for use in high power RF and microwave applications. With a thermal conductivity of almost 2.4 times the standard RT/duroid 6000 products, and
copper foil (electrodeposited and reverse treat) with excellent long term thermal stability, RT/ duroid 6035HTC laminates are an exceptional choice for high power applications. Rogers advanced filler system enables excellent drill ability, reducing drilling costs as compared to standard high thermally conductive laminates which use alumina fillers.
At increasing power levels, Rogers measured the heat rise of a resistor placed on a microstrip circuit attached to a controlled heat sink. Thermal imaging was used to generate temperature rise data. The information in this data sheet is intended to assist you in designing with Rogers’ circuit materials. It is not intended to and does not create any warranties express or implied, including any warranty of merchantability or fitness for a particular purpose or that the results shown on this data sheet will be achieved by a user for a particular purpose. The user should determine the suitability of Rogers’ circuit materials for each application.
For the design questions. or RT-Duroid 6035 PCB materials questions. If you have any questions, please feel free to contact us with info@alcantapcb.com , we will be happy to help you.