Rogers RT5880 Boards Maker,Very low DK, DK is 2.20±0.02,measured at 10GHz, Extremely low DF, measured at 10GHz, Dielectric loss factor is 0.0009, pcb-rt5880. Rogers PCB RT588O for Microwave / Antenna Field, we offer high quality Rogers RT588O RT5870, RT6006, RT6010 boards.
RT/duroid® 5870 and 5880 glass microfi ber reinforced PTFE composites are designed for exacting stripline and mi crostrip circuit applications.The randomly oriented microfi bers result in exceptional dielectric constant uniformity.The dielectric constant of RT/duroid 5870 and 5880 laminates is uniform from panel to panel and is constant over a wide frequency range.
Its low dissipation factor extends the usefulness of RT/duroid 5870 and 5880 laminates to Ku-band and above.RT/duroid 5870 and 5880 laminates are easily cut, sheared and machined to shape. They are resistant to all solvents and reagents, hot or cold, normally used in etching printed circuits or in plating edges and holes.
Normally supplied as a laminate with electrodeposited copper of ½ to 2 ounces/ ft.2 (8 to 70m) or reverse treated EDC on both sides, RT/duroid 5870 and 5880 composites can also be clad with rolled copper foil for more critical electrical applications. Cladding with aluminum, copper or brass plate may also be specifi ed.
When ordering RT/duroid 5870 and 5880 laminates, it is important to specify dielectric thickness, tolerance, rolled, electrodeposited or reverse treated copper foil, and weight of copper foil required.
Standard thickness:
0.005” (0.127mm)
0.010” (0.254mm)
0.015” (0.381mm)
0.020” (0.508mm)
0.031” (0.787mm)
0.062” (1.575mm)
0.125” (3.175mm)
Rogers RT5880 Application:
Commercial aviation telephone circuit
Microstrip and strip circuit
Millimeter wave applications
Missile guidance system
Point-to-point digital radio antennas
RT/duroid® 5870 and 5880 glass microfi ber reinforced PTFE composites are designed for exacting stripline and mi crostrip circuit applications.The randomly oriented microfi bers result in exceptional dielectric constant uniformity. The dielectric constant of RT/duroid 5870 and 5880 laminates is uniform from panel to panel and is constant over a wide frequency range.Its low dissipation factor extends the usefulness of RT/duroid 5870 and 5880 laminates to Ku-band and above.RT/duroid 5870 and 5880 laminates are easily cut, sheared and machined to shape. They are resistant to all solvents and reagents, hot or cold, normally used in etching printed
circuits or in plating edges and holes. Normally supplied as a laminate with electrodeposited copper of ½ to 2 ounces/ ft.2 (8 to 70m) or reverse treated EDC on both sides, RT/duroid 5870 and 5880 composites can also be clad with rolled copper foil for more critical electrical applications. Cladding with aluminum, copper or brass plate may also be specifi ed. When ordering RT/duroid 5870 and 5880 laminates, it is important to specify dielectric thickness, tolerance, rolled, electrodeposited or reverse treated copper foil, and weight of copper foil required.
If you have any questions, please feel free to contact us with info@alcantapcb.com , we will be happy to help you.