Rogers RT/duroid® 5880LZ PCB, RT/duroid® 5880LZ PCB,

rogers-rt/duroid®-5880lz-pcb

Rogers RT/duroid® 5880LZ PCB maker. Dk of 2.00 +/- .04, Low dissipation factor ranging from .0021 に .0027 10GHzで, Low density of 1.4 gm/cm³, 低い Z 軸熱膨張係数 40 ppm/℃.

Rogers RT/duroid 5880LZ laminates are filled PTFE composites designed for exacting strip-line and micro-strip circuit applications.RT/duroid 5880LZ laminates contain a unique filler that results in a low density, lightweight material for high performance and weight sensitive applications.

利点:

Lightweight / low density
Uniform electrical properties over a wide frequency range
Resistant to all solvents and reagents, 暑いか寒いか, normally used in etching or plating

RT/duroid® 5880LZ High Frequency PCBs:

RT/デュロイド®
5880LZ filled PTFE composites are designed for exacting stripline and microstrip circuit applications.
The unique filler results in a low density, lightweight material for high performance weight sensitive applications.
The very low dielectric constant of RT/duroid 5880LZ laminates is uniform from panel to panel and is constant over a wide frequency range. Its low dissipation factor extends the usefulness of RT/duroid 5880LZ laminates to Ku-band and above.
RT/duroid 5880LZ laminates are easily cut, 剪断して機械加工して形を整える. あらゆる溶媒や試薬に対して耐性があります。, 暑いか寒いか, normally used in etching printed circuits or in plating edges and holes.
When ordering RT/duroid 5880LZ laminates, 誘電体の厚さを指定することが重要です, 許容範囲, electrodeposited copper foil, 必要な銅箔の重量.

標準の厚さ:

0.010」 (0.254んん) ± 001
0.020」 (0.508んん) ± 001
0.050」 (1.270んん) ± 002
0.100」 (2.540んん) ± 004

標準パネルサイズ:

12” X 18” (305mm X 457mm)
24” X 18” (610mm X 457mm)
Non-standard panel sizes are available up to
24” X 54” (610mm X 1.37m)