News Archives - Page 72 of 96 - ALCANTA TECHNOLOGY(SHENZHEN)CO.,LTD - Page 72

MW400 PCB Fabrication. METEORWAVE 4000 Manufacturer. Ultra Low Loss, Very High Reliability PCB Material.Laminate Part Number: Meteorwave 4000 L. Prepreg Part Number: Meteorwave 4000 P. We produce products with zero defects. the PCB quality are perfect!

PTFE Teflon PCB, PTFE-Like PCB, High quality PTFE Teflon materials circuit board. and Ptfe-like base materials PC boards. we have made the PCB with Advanced Technologies. PTFE (Polytetrafluoroethylene) is the scientific name for a very well-known product, even outside the engineering community; DuPont's trademarked Teflon has applications extending far beyond…

A ball grid array (BGA) is a type of surface-mount packaging (a chip carrier) used for integrated circuits. BGA packages are used to permanently mount devices such as microprocessors. A BGA can provide more interconnection pins than can be put on a dual in-line or flat package. The whole bottom…

The Embedded Copper Coin PCBs means insert the copper coin into the PCB slot after finished routing and metalized after PCB press. PCB is tightly connected with copper coin through the embedding quantity between them, and the electrical connection is achieved by copper plating.

The Embedded copper coin PCB is the copper coin embedded in the PCB Cavity or slot after routing and metalized when finished PCB lamination. PCB and it’s copper coin tightly connected.

The ZBC-2000 PCB laminate is constructed using a single ply of either 106- or 6060-style prepreg, yielding a dielectric thickness after lamination of .0020 ± .0002 inches when measured by cross sectioning. The ZBC-1000 technology results in a .0010-inch dielectric distributed capacitance material.